HOME > Marine Civils > Installation Equipment
Marine Civilsmore Marine Civils >

Installation Equipment

Frames and Beams

Pipeshield - Design and Manufacture Spreader Frames and Beams.

Lifting equipment has been designed, manufactured and tested in accordance with DNV Standards to provide correct lifting arrangements of all our products enabling safe and reliable deployment.

Deepwater Frame deploying Uni-Flex mattress with anchoring attachments

ROV Operable Quick Release Systems

The quick release system generally uses a single lever mechanism, originally designed by Pipeshield to provide a simple, safe procedure for either diver or ROV to operate at sea bed.

Hydraulic Powered Surface Release System

If required, most frames can be mounted with a water pressured hydraulic ram and air pump system that will allow the quick release system to be operated remotely from the deck of the vessel.

Bespoke frame designed and used for installing anti-scour mats at a base of wind turbine 

Dimensions and Lifting Capabilities

ROV Friendly Quick-Release Frames and Beams

Length

Width

Weight

SWL Static

Lifting Points

6.0m

2.5m

1.8T

20T

18No.

6.0 twin lift

3.0

2.5T

30T

2 x 18No.

8.0m

2.8m

2.44T

30T

26No.

10.0m

2.8m

2.7T

30T

30No.

12.0m HD

2.8m

5T

80T

26No.

12m twin lift

2.8

3.65

30T

2 x 18No.

7m for deep water use

2.7

1.93T

20T

18No.

6.0m Beam

0.32m

0.85T

20T

18no.

Additionally we have manual release frames and beams for diver deployment. All frames are designed with a DAF allowance of 2.0 i.e. the ultimate capacity is double the static SWL. The standard tubular framed equipment operates to 200m water depth but the non -tubular frames are suitable for any depth of operation.

Quick release frame shown deploying a 150mm thick bi-flex mattress.

Long log Uni-Flex mattress being mobilised for installation on 10m quick release frame.

| Share